Na zdjęciu widać czerwone urządzenie hydrauliczne do prac montażowych lub serwisowych. Na metalowej ramie znajdują się dwa duże cylindryczne elementy oraz centralnie umieszczony czarny siłownik. Osoba w czerwonej odzieży roboczej i rękawicach obsługuje urządzenie za pomocą przenośnego narzędzia. Konstrukcja znajduje się na drewnianym blacie, a w tle widoczne są elementy instalacji technicznej.

GWO Basic Technical Training – Combination (BTT M, BTT B)

SKU: GWO BTT M, BTT B

Course objective

The aim is to provide basic mechanical knowledge and specialist skills in the handling of bolted joints. The course prepares participants for the safe assembly and maintenance of turbine structural components, where the precise tightening of bolts to high torque is crucial.

Duration: 19 hours

Location: Gdynia

GWO compilance: V11

Price per person: 3950 zł

(about 909 €)

Send a course enquiry

Course description

The training combines two complementary modules:

BTT Mechanical (BTTM): Learning about turbine construction, component identification, the use of basic hand tools and power tools, and safety rules for mechanical work.
BTT Bolt Tightening (BTTB): Practical training in tightening techniques. This covers the use of torque wrenches (manual and electric) and advanced hydraulic systems (pumps, cassette wrenches and tensioners).

Duration

The course lasts 19 hours.

Prerequisites

Possession of a valid WINDA ID number,
At least 18 years of age,
No health contraindications to physical work,
Ability to use simple workshop tools.The certificate does not expire (it is valid indefinitely). GWO recognises that once acquired, technical fundamentals remain valid unless standards change drastically.
Information about the completed training will be recorded in the international GWO WINDA database. The digital record enables authorised employers to instantly verify the holder’s qualifications. For the participant, this means easy confirmation of competence worldwide without the need for paper documents.

Outcomes upon completion

Able to perform basic mechanical work in accordance with service instructions, safely operate high-pressure hydraulic tools for tightening bolts. Correctly select torque and clamping force in accordance with technical specifications, and identify wear and damage to fasteners and tools.

Certificate validity

The certificate does not expire (it is valid indefinitely). GWO recognises that once acquired, technical fundamentals remain valid unless standards change drastically.

Information about the completed training will be recorded in the international GWO WINDA database. The digital record enables authorised employers to instantly verify the holder’s qualifications. For the participant, this means easy confirmation of competence worldwide without the need for paper documents.

What to bring

Valid ID card or passport,
Workwear (trousers, T-shirt) – the mechanical module and work with hydraulic tools involve a risk of getting covered in grease,
Safety footwear (with a metal or composite toe cap).

Send a course enquiry

Why choose us?

Certified and audited GWO training centre

We offer one of the broadest training portfolios on the market and operate in accordance with international Global Wind Organisation standards. The quality of our training, the competencies of our instructors and our infrastructure are regularly audited.

ONLY AT IM TRAINING: a globally unique PCTC crew course using a full-scale training facility

We have a specialist training ground where participants practise realistic scenarios, including firefighting operations on PCTC vessels, RO-RO vessels and ferries, as well as hazards associated with electric vehicle fires.

We were the first in Poland to introduce GWO High Voltage courses

We made competencies available in Poland that previously required training abroad, reducing the time companies need to prepare teams for onshore and offshore projects.

End-to-end training organisation

We manage the entire process, from agreeing a suitable date and arranging transport and accommodation to delivering the training and preparing complete documentation. We also provide end-to-end support for groups and teams travelling from abroad.

Realistic, modern training infrastructure

We train participants using specialist equipment, full-scale structures, training towers, simulators and a pool, so they can practise procedures rather than simply hear about them.

Partnerships with industry and academic leaders

We work with Energy Innovation in Norway and leading maritime institutions in Poland: Gdynia Maritime University and the Polish Naval Academy. We combine international industry experience with expert knowledge and the resources of Polish maritime universities.

We care about more than just training

Accommodation facilities

We assist course participants and companies in arranging accommodation in Gdynia for the duration of their training. We partner with reliable accommodation providers offering a range of standards and price points, all located with convenient access to our training center.

Learn more

Transport

We arrange transport for course participants from Poland and abroad. We offer transfers from airports, train stations, hotels, or company offices directly to IM Training in Gdynia. For training groups, we can also organize daily transfers between the accommodation and the training center.

Learn more

Occupational health

In cooperation with an external clinic, we help arrange the required occupational health examinations. The scope may include, among others, the Chester Step Test, an exercise stress test, and the option to obtain an OEUK/OGUK certificate.

Learn more

Ask about GWO Basic Technical Training – Combination (BTT M, BTT B)

Do you need accommodation or transport?

Check the details

See other Courses

Na zdjęciu widać osobę pracującą na pokładzie łodzi, która obsługuje linę żeglarską przy metalowym urządzeniu pokładowym. Widoczne są elementy osprzętu żeglarskiego, liny oraz relingi. W tle znajduje się spokojna tafla wody i jasne niebo.

Able Seafarer Deck

Course objective:

The aim of the course is to acquire knowledge in the field of basic navigation, regulations for preventing collisions at sea, maritime communications, and the International Code of Signals (ICS).

3 500 zł netto + 23%VAT

about 805 €

See details

Na zdjęciu widać dwa duże, pomarańczowe suwnice przeładunkowe pracujące na terenie portu kontenerowego. Konstrukcje wyposażone są w podnośniki i mechanizmy służące do przemieszczania ładunków. W tle znajdują się kolorowe kontenery ułożone w stosy oraz zabudowania portowe.

Cranes, Hoists, and Winches for General and Special Purposes

Course objective:

Operation of equipment designed for moving cargo vertically and horizontally within spaces with limited lifting height.

2 500 zł netto + 23%VAT

about 575 €

See details

Na zdjęciu widać pracownika w odzieży ochronnej i kasku, który znajduje się na terenie przemysłowej instalacji technologicznej. Wokół niego biegną rozbudowane białe rurociągi, zawory oraz elementy infrastruktury przemysłowej. Mężczyzna sprawdza lub obsługuje jeden z elementów instalacji. W tle widoczne są metalowe konstrukcje i pomosty, a całość znajduje się na otwartym terenie przy bezchmurnym niebie.

Electrical Power Qualification – Group 2 (SEP)

Course objective:

The aim of the course is to prepare participants for the safe operation and supervision of heat-consuming equipment, solid and liquid fuel-fired devices, as well as equipment used for processing and transmitting heat. The training covers comprehensive subject matter in accordance with SEP G2 qualification requirements.

500 zł netto + 23%VAT

about 115 €

See details

Na zdjęciu widoczny jest metalowy właz prowadzący do pionowej przestrzeni zamkniętej. Wewnątrz znajduje się stalowa drabina umożliwiająca zejście na niższy poziom, a na dole widoczna jest osoba znajdująca się w przestrzeni. Zdjęcie przedstawia infrastrukturę wykorzystywaną do wejścia i pracy w przestrzeniach zamkniętych, np. podczas szkoleń z zakresu bezpieczeństwa i ratownictwa.

Confined Space Entry (CSE)

Inter Marine compilance: IMV1

Course objective:

To acquire the knowledge and practical skills necessary for safe entry, work and evacuation from confined spaces. The course teaches how to identify hazards (e.g. lack of oxygen, presence of toxic gases) and how to respond correctly in emergency situations in areas with restricted access.

850 zł netto + 23%VAT

about 196 €

See details

View all our courses

Why do companies and course participants choose IM Training?

Average rating

Grafika przedstawia ocenę w postaci pięciu gwiazdek, z czego cztery są w pełni wypełnione, a piąta częściowo wypełniona, co wskazuje na ocenę około 4,5/5.

4.97

Katarzyna

Crew Manager

Employees return ready to work

The training is practical and delivered in conditions similar to real workplace situations. Our employees return with the required certificates, but above all with knowledge and skills they can use at work.

Jacek

Course participant

I am very satisfied

I took two GWO courses and I am very satisfied. There was plenty of hands-on practice and realistic simulations, and the instructors explained everything clearly and patiently.

Piotr

Operations Director

End-to-end support

IM Training efficiently organised training for our international team, including the logistics, language and formal requirements. Thanks to the effective coordination, we could focus on the project without involving our own team in organising the trip.

Asia

Course participant

Highly competent instructors

The practical sessions after the theory are eye-opening. The instructors are highly competent and the course was delivered thoroughly.

Mateusz

Offshore Project Manager

Fast scheduling and flexibility

The training dates were aligned with our team mobilisation schedule. The quick response, flexible approach and option to train a larger group on the same date made it significantly easier to prepare our employees for the project.

Mikołaj

Course participant

Very good facilities and workstation preparation

A repair techniques course. Very good facilities and workstation preparation, efficient organisation and a high standard of practical training.

Paweł

Course participant

The training material was thoroughly covered.

Very good training delivered by competent instructors. The sessions were engaging, the time passed very quickly and there was plenty of hands-on practice. The training material was thoroughly covered.

Monika

Course participant

Modern equipment, no nonsense

The working at heights course is mainly practical: equipment, fall protection and emergency scenarios. Everything was well organised, the instructors were direct and clear, and the equipment was modern. No nonsense.

support available through BUR

See details

Send a course enquiry

GWO Basic Technical Training – Combination (BTT M, BTT B)

Course objective

Course description

Duration

Prerequisites

Outcomes upon completion

Certificate validity

What to bring

Why choose us?

Certified and audited GWO training centre

ONLY AT IM TRAINING: a globally unique PCTC crew course using a full-scale training facility

We were the first in Poland to introduce GWO High Voltage courses

End-to-end training organisation

Realistic, modern training infrastructure

Partnerships with industry and academic leaders

We care about more than just training

Accommodation facilities

Transport

Occupational health

Ask about GWO Basic Technical Training – Combination (BTT M, BTT B)

See other Courses

Able Seafarer Deck

Cranes, Hoists, and Winches for General and Special Purposes

Electrical Power Qualification – Group 2 (SEP)

Confined Space Entry (CSE)

Why do companies and course participants choose IM Training?

Employees return ready to work

I am very satisfied

End-to-end support

Highly competent instructors

Fast scheduling and flexibility

Very good facilities and workstation preparation

The training material was thoroughly covered.

Modern equipment, no nonsense

Our trainings

Additional services

Company