We regularly send employees, and they always return well prepared. IM Training handles everything: training, transportation, accommodation – professionally and without any issues.
Verified purchase
GWO Control of Hazardous Energies Standard Basic Safety (BS)
The training takes place at the Training Center and lasts 5 hours.
On-Demand Course – Flexible Scheduling.
Feel free to contact us!
1 100 zł netto + 23%VAT
Approximately 261 €
Course duration:
The training takes place at the Training Center and lasts 250 minutes / 5 hours.
Prerequisites:
There are no prerequisites for attending the CoHE Basic Safety module.
Registration in the WINDA database at winda.globalwindsafety.org and obtaining a WINDA ID is required (registration can be completed during the training).
IMPORTANT:
-
Participants must complete the CoHE Basic Safety module and the BTT Electrical module before attending the CoHE Electrical Safety training. It is strongly recommended that participants gain supervised, practical work experience with electricity before enrolling in the CoHE Electrical Safety module.
-
Similarly, participants must complete the CoHE Basic Safety module and the BTT Hydraulics module before attending the CoHE Pressure Fluid Safety training. It is strongly recommended that participants gain supervised, practical work experience with pressure fluids before enrolling in the CoHE Pressure Fluid Safety module.
Validity:
2 years (24 months)
Training objective and outcomes:
The aim of the GWO CoHE Safety module is to equip participants with the ability to work safely around hazardous energy sources and to enable them to perform assigned tasks without risk.
Ask for details about GWO Control of Hazardous Energies Standard Basic Safety (BS)
Don’t forget to ask about accommodation (lodging) and transportation to and from the course – see details!
Course reviews
I took two GWO courses and I’m very satisfied. A lot of practice, realistic simulations, instructors explain clearly and patiently.
Verified purchase
The height work course is mainly practical – equipment, safety, emergency scenarios. Everything was well organized, the instructors were direct, modern equipment, no nonsense.
Verified purchase
Practical sessions after the lecture are eye-opening. Very competent instructors, the course was done thoroughly.
Verified purchase
A course on repair techniques. Very good conditions and preparation of the workspace. Efficient organization and practical training level.
Verified purchase
Very good training thanks to competent instructors. Interesting classes, the time flew by quickly, and there was a lot of practice. The training material was thoroughly covered.
Verified purchase
Calendar
Warning: Undefined array key "events" in /home/platne/serwer280000/public_html/imtraining.pl/wp-content/plugins/fooevents-calendar/class-fooevents-calendar.php on line 1652
Warning: foreach() argument must be of type array|object, null given in /home/platne/serwer280000/public_html/imtraining.pl/wp-content/plugins/fooevents-calendar/class-fooevents-calendar.php on line 1652
See other courses
GWO Basic Safety Training Onshore
Teaching mode: on-site (4 days)
4 200 zł netto + 23%VAT
GWO Basic Safety Training Offshore
Teaching mode: on-site (5 days)
6 200 zł netto + 23%VAT
GWO Basic Safety Training Onshore (Refresher)
Teaching mode: on-site (2 class days)
3 400 zł netto + 23%VAT
Proficiency In Fire Fighting On PCTC, RO -RO & FERRIES Course (FFPCTC)
Training takes place at the Training Centre in Gdansk and lasts 3 days
9 500 zł netto + 23%VAT
GWO Basic Safety Training Offshore (Refresher)
Teaching mode: on-site (3 days)
5 400 zł netto + 23%VAT
The training takes place at the Training Center and lasts for 2 days
2 150 zł netto + 23%VAT
Course is held at the Training Center 7 hours
950 zł netto + 23%VAT
The training takes place at the Training Center and lasts for 4 hours (half a day)
480 zł netto + 23%VAT
Teaching mode: on-site (4 hours / 0.5 day)
740 zł netto + 23%VAT
The training takes place at the Training Center and lasts for 1 day
2 000 zł netto + 23%VAT
GWO Wind Limited Access Onshore – ONL
Teaching mode: on-site (4 hours, but we recommend taking an 8-hour course at the same price)
1 050 zł netto + 23%VAT
GWO Wind Limited Access Offshore – OFL
Teaching mode: on-site (8 hours / 1 day)
1 600 zł netto + 23%VAT
GWO Working at Heights (Refresher) – WAHR
The training takes place at the Training Center and lasts for 1 day
1 500 zł netto + 23%VAT
GWO First Aid (Refresher) – FAR
Course is held at the Training Center 4hrs (half day)
950 zł netto + 23%VAT
GWO Manual Handling (Refresher) – MHR
The training takes place at the Training Center and lasts for 4 hours (half a day)
480 zł netto + 23%VAT
GWO Fire Awareness (Refresher) – FAWR
Teaching mode: on-site (4 hours / 0.5 day)
740 zł netto + 23%VAT
GWO Sea Survival (Refresher) – SSR
The training takes place at the Training Center and lasts for 1 day
2 000 zł netto + 23%VAT
GWO Working at Heights & Manual Handling Combined – WAH/MH Combined
Teaching mode: on-site (2 days)
2 300 zł netto + 23%VAT
GWO Working at Heights with Manual Handling (Refresher) – MHR/WAHR
Teaching mode: on-site (1 day)
1 650 zł netto + 23%VAT
Teaching mode: on-site 1 day
370 zł netto + 23%VAT
LOTO training courses: Lockout Tagout
Teaching mode: on-site 1 day
500 zł netto + 23%VAT
Teaching mode: on-site 5 days
2 000 zł netto + 23%VAT
The training takes place at the Training Centre in Gdynia and lasts 1 day
2 050 zł netto + 23%VAT
The training takes place at the Training Centre in Gdynia and lasts 1.5 days
1 500 zł netto + 23%VAT
The training takes place at the Training Centre in Gdynia and lasts 1.5 days
1 550 zł netto + 23%VAT
GWO Bolt Tightening Module – BTT B
The training takes place at the Training Centre in Gdynia and lasts 1 day
1 970 zł netto + 23%VAT
GWO Installation Module – BTT I
The training takes place at the Training Centre in Gdynia and lasts 2.5 days
5 250 zł netto + 23%VAT
The training takes place at the Training Center and lasts for 4 hours (half a day)
800 zł netto + 23%VAT
GWO Enhanced First Aid – Refresher EFA-R
Training takes place at the Training Centre and lasts 14 hours, 2 days
1 560 zł netto + 23%VAT
GWO Hub, Spiner and Inside Blade Rescue ART-H
Training lasts 1,5 day, 720 minutes
2 150 zł netto + 23%VAT
GWO Nacelle, Tower and Basement Rescue ART-N
The training takes place at the Training Centre and lasts 2 days (840 minutes).
2 850 zł netto + 23%VAT
GWO Nacelle, Tower and Basement Rescue Refresher ART-NR
The training takes place at the Training Centre and lasts 2 days (840 minutes).
2 850 zł netto + 23%VAT
Training takes place at the Training Centre and lasts 21 hours, 3 days
2 460 zł netto + 23%VAT
GWO Hub, Spiner and Inside Blade Rescue Refresher ART-HR
Training lasts 1 day, 405 minutes
1 700 zł netto + 23%VAT
Training lasts 3 days and takes place at the Training Center
4 900 zł netto + 23%VAT
Training takes place at the Training Center and lasts 4 hours
600 zł netto + 23%VAT
Training takes place at the Training Center and lasts 6 hours
800 zł netto + 23%VAT
The training takes place at the Training Center and lasts for 4 days
6 300 zł netto + 23%VAT
GWO High Voltage Operations (HV OP)
The training takes place at the Training Center and lasts 3,5 days
5 600 zł netto + 23%VAT
GWO High Voltage Cable Pulling (HV CP)
The training takes place at the Training Center and lasts 1 day.
1 870 zł netto + 23%VAT
The training takes place at the Training Center and lasts 2 days.
3 450 zł netto + 23%VAT
The training takes place at the Training Center and lasts 2 days.
3 400 zł netto + 23%VAT
GWO Control of Hazardous Energies Standard Electrical Safety (ES)
The training takes place at the Training Centre and lasts 2 days.
3 300 zł netto + 23%VAT
GWO Control of Hazardous Energies Standard Pressure Fluid Safety (PFS)
The training takes place at the Training Center and lasts 1 day.
2 200 zł netto + 23%VAT
GWO Control of Hazardous Energies Standard Basic Safety Refresher (BaSC-R)
The training takes place at the Training Center and lasts 1,5 hours.
450 zł netto + 23%VAT
GWO Control of Hazardous Energies Standard Pressure Fluid Safety Refresher (PFS-R)
The training takes place at the Training Center and lasts 2,5 hours.
750 zł netto + 23%VAT
GWO Control of Hazardous Energies Standard Electrical Safety Refresher (ES-R)
The training takes place at the Training Centre and lasts 4 hours.
1 200 zł netto + 23%VAT
Confined Space Entry Medium Risk – CSE MR
Training takes place at the Training Centre and lasts 445 minutes
1 100 zł netto + 23%VAT