We regularly send employees, and they always return well prepared. IM Training handles everything: training, transportation, accommodation – professionally and without any issues.
Verified purchase
GWO Control of Hazardous Energies Standard Pressure Fluid Safety (PFS)
The training takes place at the Training Center and lasts 1 day.
On-Demand Course – Flexible Scheduling.
Feel free to contact us!
521 € netto + 23%VAT
Approximately 521 € netto + 23%VAT
Course duration:
The training takes place at the Training Center in Gdynia and lasts 420 minutes / 1 day.
Prerequisites:
Participants must complete the CoHE Basic Safety module and the BTT Hydraulics module before attending the CoHE Pressure Fluid Safety module. It is strongly recommended that, before starting the CoHE Pressure Fluid Safety module, participants gain supervised practical work experience with pressure fluids.
Registration in the WINDA database (winda.globalwindsafety.org) and obtaining a WINDA ID are required (it is possible to register during the training).
Validity:
2 years (24 months)
Training objective and outcomes:
The aim of the GWO CoHE Pressure Fluid Safety module is to equip participants with the principles and habits required to safely carry out tasks involving, or carried out near, pressure fluids. Upon successful completion of the GWO CoHE Pressure Fluid Safety module, participants will be able to minimize associated risks and work safely with pressure fluids through the proper selection and use of personal protective equipment (PPE) and the application of safe working practices.
Ask for details about GWO Control of Hazardous Energies Standard Pressure Fluid Safety (PFS)
Don’t forget to ask about accommodation (lodging) and transportation to and from the course – see details!
Course reviews
I took two GWO courses and I’m very satisfied. A lot of practice, realistic simulations, instructors explain clearly and patiently.
Verified purchase
The height work course is mainly practical – equipment, safety, emergency scenarios. Everything was well organized, the instructors were direct, modern equipment, no nonsense.
Verified purchase
Practical sessions after the lecture are eye-opening. Very competent instructors, the course was done thoroughly.
Verified purchase
A course on repair techniques. Very good conditions and preparation of the workspace. Efficient organization and practical training level.
Verified purchase
Very good training thanks to competent instructors. Interesting classes, the time flew by quickly, and there was a lot of practice. The training material was thoroughly covered.
Verified purchase
Calendar
Warning: Undefined array key "events" in /home/platne/serwer280000/public_html/imtraining.pl/wp-content/plugins/fooevents-calendar/class-fooevents-calendar.php on line 1652
Warning: foreach() argument must be of type array|object, null given in /home/platne/serwer280000/public_html/imtraining.pl/wp-content/plugins/fooevents-calendar/class-fooevents-calendar.php on line 1652
See other courses
GWO Basic Safety Training Onshore
Teaching mode: on-site (4 days)
995 € netto + 23%VAT
GWO Basic Safety Training Offshore
Teaching mode: on-site (5 days)
1 469 € netto + 23%VAT
GWO Basic Safety Training Onshore (Refresher)
Teaching mode: on-site (2 class days)
806 € netto + 23%VAT
Proficiency In Fire Fighting On PCTC, RO -RO & FERRIES Course (FFPCTC)
Training takes place at the Training Centre in Gdansk and lasts 3 days
2 252 € netto + 23%VAT
GWO Basic Safety Training Offshore (Refresher)
Teaching mode: on-site (3 days)
1 280 € netto + 23%VAT
The training takes place at the Training Center and lasts for 2 days
510 € netto + 23%VAT
Course is held at the Training Center 7 hours
225 € netto + 23%VAT
The training takes place at the Training Center and lasts for 4 hours (half a day)
114 € netto + 23%VAT
Teaching mode: on-site (4 hours / 0.5 day)
175 € netto + 23%VAT
The training takes place at the Training Center and lasts for 1 day
474 € netto + 23%VAT
GWO Wind Limited Access Onshore – ONL
Teaching mode: on-site (4 hours, but we recommend taking an 8-hour course at the same price)
249 € netto + 23%VAT
GWO Wind Limited Access Offshore – OFL
Teaching mode: on-site (8 hours / 1 day)
379 € netto + 23%VAT
GWO Working at Heights (Refresher) – WAHR
The training takes place at the Training Center and lasts for 1 day
356 € netto + 23%VAT
GWO First Aid (Refresher) – FAR
Course is held at the Training Center 4hrs (half day)
225 € netto + 23%VAT
GWO Manual Handling (Refresher) – MHR
The training takes place at the Training Center and lasts for 4 hours (half a day)
114 € netto + 23%VAT
GWO Fire Awareness (Refresher) – FAWR
Teaching mode: on-site (4 hours / 0.5 day)
175 € netto + 23%VAT
GWO Sea Survival (Refresher) – SSR
The training takes place at the Training Center and lasts for 1 day
474 € netto + 23%VAT
GWO Working at Heights & Manual Handling Combined – WAH/MH Combined
Teaching mode: on-site (2 days)
545 € netto + 23%VAT
GWO Working at Heights with Manual Handling (Refresher) – MHR/WAHR
Teaching mode: on-site (1 day)
391 € netto + 23%VAT
Teaching mode: on-site 1 day
88 € netto + 23%VAT
LOTO training courses: Lockout Tagout
Teaching mode: on-site 1 day
119 € netto + 23%VAT
Teaching mode: on-site 5 days
474 € netto + 23%VAT
The training takes place at the Training Centre in Gdynia and lasts 1 day
486 € netto + 23%VAT
The training takes place at the Training Centre in Gdynia and lasts 1.5 days
356 € netto + 23%VAT
The training takes place at the Training Centre in Gdynia and lasts 1.5 days
367 € netto + 23%VAT
GWO Bolt Tightening Module – BTT B
The training takes place at the Training Centre in Gdynia and lasts 1 day
467 € netto + 23%VAT
GWO Installation Module – BTT I
The training takes place at the Training Centre in Gdynia and lasts 2.5 days
1 244 € netto + 23%VAT
The training takes place at the Training Center and lasts for 4 hours (half a day)
190 € netto + 23%VAT
GWO Enhanced First Aid – Refresher EFA-R
Training takes place at the Training Centre and lasts 14 hours, 2 days
370 € netto + 23%VAT
GWO Hub, Spiner and Inside Blade Rescue ART-H
Training lasts 1,5 day, 720 minutes
593 € netto + 23%VAT
GWO Nacelle, Tower and Basement Rescue ART-N
The training takes place at the Training Centre and lasts 2 days (840 minutes).
640 € netto + 23%VAT
GWO Nacelle, Tower and Basement Rescue Refresher ART-NR
The training takes place at the Training Centre and lasts 2 days (840 minutes).
521 € netto + 23%VAT
Training takes place at the Training Centre and lasts 21 hours, 3 days
583 € netto + 23%VAT
GWO Hub, Spiner and Inside Blade Rescue Refresher ART-HR
Training lasts 1 day, 405 minutes
474 € netto + 23%VAT
Training lasts 3 days and takes place at the Training Center
1 161 € netto + 23%VAT
Training takes place at the Training Center and lasts 4 hours
142 € netto + 23%VAT
Training takes place at the Training Center and lasts 6 hours
190 € netto + 23%VAT
The training takes place at the Training Center and lasts for 4 days
1 493 € netto + 23%VAT
GWO High Voltage Operations (HV OP)
The training takes place at the Training Center and lasts 3,5 days
1 327 € netto + 23%VAT
GWO High Voltage Cable Pulling (HV CP)
The training takes place at the Training Center and lasts 1 day.
443 € netto + 23%VAT
The training takes place at the Training Center and lasts 2 days.
818 € netto + 23%VAT
The training takes place at the Training Center and lasts 2 days.
806 € netto + 23%VAT
GWO Control of Hazardous Energies Standard Basic Safety (BS)
The training takes place at the Training Center and lasts 5 hours.
261 € netto + 23%VAT
GWO Control of Hazardous Energies Standard Electrical Safety (ES)
The training takes place at the Training Centre and lasts 2 days.
782 € netto + 23%VAT
GWO Control of Hazardous Energies Standard Basic Safety Refresher (BaSC-R)
The training takes place at the Training Center and lasts 1,5 hours.
107 € netto + 23%VAT
GWO Control of Hazardous Energies Standard Pressure Fluid Safety Refresher (PFS-R)
The training takes place at the Training Center and lasts 2,5 hours.
178 € netto + 23%VAT
GWO Control of Hazardous Energies Standard Electrical Safety Refresher (ES-R)
The training takes place at the Training Centre and lasts 4 hours.
284 € netto + 23%VAT
Confined Space Entry Medium Risk – CSE MR
Training takes place at the Training Centre and lasts 445 minutes
356 € netto + 23%VAT